through holes pcb онлайн производство

Rogers High Frequency PCB Built on Kappa 438 40mil 1.016mm DK 4.38 with Immersion Gold for Distributed Antenna Systems (Printed Circuit Boards are custom-made products, the picture and parameters shown are just ... Подробнее

High Tg Lead Free Multi-layer Printed Circuit Board Built on TU-768 Core and TU-768P Prepreg (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) General ... Подробнее

How to Distinguish the Step (Stack-up) of HDI PCB? Tag#Stacked via Staggered via HDI | PCB 1+N+1 HDI PCB | 2+N+2 HDI PCB HDI stands for high density interconnection. It contains non-mechanical drilling, the ... Подробнее

Blind Via PCB Built on Tg150℃ FR-4 With Immersion Gold 4-Layer FR-4 Circuit Board (Printed circuits boards are custom-made products, the picture and parameters shown are just for reference) 1.1 General ... Подробнее

Brief Introduction This is a 2-layer rigid PCB with a stackup consisting of copper_layer_1 (35 μm), a Rogers RO4830 Core (9.4 mil or 0.239 mm), and copper_layer_2 (35 μm). The PCB is designed with specific ... Подробнее

Copper Based PCB Single Sided Copper PCB Insulated Metal Substrate PCB IMS PCB 1. General information This is a type of metal core PCB built on copper base with 1W/MK dielectric. It's single sided copper PCB ... Подробнее

30mil RF-45 High Frequency PCB with Blue Solder Mask Coating Immersion Silver on Pads (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) Brief Introductio... Подробнее

30mil AD1000 High Frequency PCB Double Sided RF PCB DK 10.2 PWB with Immersion Gold (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) Brief Introduction ... Подробнее

Brief Introduction This 2-layer rigid PCB features a stackup with copper_layer_1 of 35 μm, a Rogers RO4725JXR Core of 30.7mil (0.780 mm), and copper_layer_2 of 35 μm. It has a finished board thickness of 0.9mm ... Подробнее

Brief Introduction The stackup of the this PCB consists of two copper layers, each with a thickness of 35 μm. The substrate material used is RO3206, which has a thickness of 0.635 mm (25mil). This is a type of ... Подробнее